*
By using the drain pipe of the laundry sink:
DV6900B_LED_WEB_Heatpump_EN.indd 23
A
A
A
CAUTION
• Connect the hose guide (A) within 6 in.
(15 cm)* of the end of the drain hose.
If the drain hose is extended beyond
the end of the hose guide, mold or
microorganisms could spread inside the
dryer.
• The drain hose can be installed up to
35.4 in. (90 cm) high, but the draining
capability can be reduced at the
maximum height. Too much water
remaining in Dryer may cause
malfunction.
Wall standpipe drain system
The drain hose can be placed into a wall
standpipe drain system. To keep the end of
the drain hose bent, use the supplied hose
guide (A). Secure the guide to the wall
using a hook to ensure stable drainage.
1. Assemble the hose connector (A), and
attach it to the end of the accessory
hose as shown.
CAUTION
To prevent water leaks, make sure to
connect the hose and the connector firmly.
2. Connect the hose adaptor directly to
the drain pipe of the laundry sink.
English 23
2022/6/23 16:15:49