Tabla de contenido
Publicidad
Input Video Channel Indicator LEDs and Select Button
Press the Select button to sequentially select one of the 3 inputs
Signal Boost Button and LED indicator
If you have a cable longer than about 15 feet connected to the output
press this button once to boost the output signal strength. In general
leave this in off mode unless you are observing digital artifacts that
indicate signal loss such as pixilation, freezing, or loss of image.
Input Power Indicator
The unit does not have an on-off button. This light comes on as soon as
you plug in the power adapter.
DC Input Power Jack
Plug the included power supply to this jack. The red LED should come
on indicating power is on. NEVER SUBSTITUTE ANY OTHER
POWER SUPPLY AS THIS MAY (and probably will) DESTROY
THE UNIT.
HDMI Input and Output Connector
Using a high quality HDMI cable, connect the output (left most)
connector to your display. Connect your inputs starting with HDMI #1
(right most) - cable not supplied - Contact Black Box Corporation if
you cables.
2. Installation
3 to 1 HDMI Switch
Front Panel
Rear Panel
5
Publicidad
Tabla de contenido
