HOMCOM 820-348V70 Instrucciones De Ensamblaje página 7

FREQUENTLY ASKED QUESTIONS
Q. Can I use more than one heater at a time? Can I use the heater with another appliance at
the same time?
A. Yes, but make sure they are not plugged into the same circuit. Each heater requires its own
minimum 7.5-amp circuit with no other items plugged into that circuit or outlet. This is because
heaters are considered appliances and draw out high amperage. If you are unsure your circuit meets
these requirements, verify with a certified electrician.
WARNING: Risk of fire and damage to property could result if requirements are not met.
Q. The power cord gets warm. The cord is showing signs of heat or melting at the outlet, is
this normal?
A. A warm power cord is normal. These power cords are certified by VDE. However, If you detect
heat, smoke or signs of melting at the contact point of the wall outlet, it may be due to loose or worn
wall contacts (or arcing). Please top using the heater immediately, contact warranty support for a
replacement cord, and have a certified electrician replace the wall outlet as soon as possible.
PREPERATION
Place the heater on a firm, level surface and plug into a 220-240V, 50Hz power outlet. Only operate
the heater in an upright position.
Please note:
- Portable fireplaces do not heat like a traditional space heater.
- Do not expect portable fireplaces to blow hot air like a traditional space heater.
- Portable fireplaces supplement an already heated, insulated room.
- Square footage specifications assume a single enclosed room, not an entire room.
- Portable fireplaces do not heat through walls, floors and are not intended to replace a main heat
source.
- Portable fireplaces can take at least 24 hours to warm a room but operate more efficiently to
maintain the desired temperature.
- Portable fireplaces will not work well in uninsulated or unheated spaces, such as RV's, garages
and unheated basements.
7