STERWINS EPS2-20.3 Manual De Instrucciones página 261

2. SAFETY INSTRUCTIONS
injury.
4. Hold the product by insulated gripping surfaces only, because the
saw chain may contact hidden wiring or its own cord. Saw chains
contacting a "live" wire may make exposed metal parts of the
product "live" and could give the operator an electric shock.
5. Keep cable away from cutting area. During operation the cable may be
hidden in shrubs and can be accidentally cut by the blade.
6. Keep all parts of the body away from the saw chain when the product
is operating. Before you start the product, make sure the saw chain
is not contacting anything. A moment of inattention while operating
products may cause entanglement of your clothing or body with the
saw chain.
7. Always hold the product with both hands on the handle and soft grip.
Holding the product with only one hand or on parts not intended for
that increases the risk of personal injury and should never be done.
8. Wear safety glasses and hearing protection. Further protective
equipment for head, hands, legs and feet is recommended. Adequate
protective clothing will reduce personal injury by flying debris or
accidental contact with the saw chain.
9. Do not operate a product in a tree. Operation of a product while up in a
tree may result in personal injury.
10.Always keep proper footing and operate the product only when
standing on fixed, secure and level surface. Slippery or unstable
surfaces such as ladders may cause a loss of balance or control of the
product.
11.Carry the product by the soft grip with the product switched off and
away from your body. When transporting or storing the product always
fit the guide bar cover. Proper handling of the product will reduce the
likelihood of accidental contact with the moving saw chain.
12.Follow instructions for lubricating, chain tensioning and changing
accessories. Improperly tensioned or lubricated chain may either break
EN
260