STERWINS EPS2-20.3 Manual De Instrucciones página 268

Kickback
WARNING! Beware of kickback! Kickback can lead to dangerous loss
of control of the product and result in serious or fatal injury to the
operator or anyone standing close by! Always be alert because rotational
kickback and pinch kickback are major product operational dangers and
the leading cause of most accidents!
1. Kickback is the sudden backward/upward motion of the product,
occurring when the chain (at the tip of the chain bar) comes in contact
with a log or wood, or when the chain becomes jammed.
2. When kickback occurs the product reacts unpredictably and can cause
severe injuries to the operator or bystanders.
3. With a basic understanding of 'kickback' , the element of surprise can
be reduced or eliminated. Sudden surprise contributes to the majority
of accidents.
4. You should read all the safety warnings and user instructions carefully
before attempting to operate this product.
To avoid kickback:
• Never work with a loose, widely stretched or heavily worn chain.
• Always use a low kickback chain.
• Ensure correct chain tension.
• Ensure the chain is sharpened correctly.
• Never work with the tip of the guide bar.
• Saw with the guide bar at a flat angle.
• Always hold the product firmly with both hands.
Pruning
1. Always hold the product firmly with both hands on gripping surface
and rear handle. Never operate this product using only one hand.
2. Maintain a firm grip with your thumbs and fingers encircling the
handles. A firm grip will help you reduce 'kickback' and maintain
2. SAFETY INSTRUCTIONS
267
EN