senya EASYOU SYIR-I016 Manual De Instrucciones página 44

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
button sharply.
5. Be careful : Steam and boiling water will come out of the soleplate so as to eject the lime
deposits.
6. Release the button when the water tank is empty.
Note :
 You can reheat the iron , then use the automatic cleaning function again.
 Never put white vinegar or any other liquid cleaning product to eliminate the lime deposits
in the tank.
 It is important to clean the apparatus regularly depending on the hardness of the water and
the frequency of use.
IV-MAINTENANCE AND STORING
Storing :
1.
Once ironing is over, unplug the apparatus.
2.
Empty the water tank.
3.
Leave the iron to cool and turn the temperature control knob to minimum before storing it.
4.
Do not store the apparatus next to heart sources, for exemple fire, radiator, or any other
heating apparatus.
Cleaning :
1.
To remove any incrustations or residue from the soleplate, use a wet soft cloth
2.
Dry the soleplate thoroughly after cleaning.
3.
Clean the iron shell with a wet cloth without detergent
4.
Caution : do not use a metal sponge or abrasive detergents.
V- TROUBLESHOOTING GUIDE
Problems
The iron gives off
a smell or smoke
The iron does not
warm up
Causes
The iron gives off a smell
or smoke when it is
plugged for
the first time
The iron is not plugged
The temperature is not
properly set
Solutions
Smells and smoke will disappear
minutes
Check thatthe iron is plugged
socket
Check that the temperature
control knob is set properly
43

Publicidad

Tabla de contenido
loading

Tabla de contenido