senya EASYOU SYIR-I016 Manual De Instrucciones página 45

The iron does not
give steam
The jet function
does not work
The spray
function does
not work
Water leaks from
the iron
The iron leaves
traces on the
garments
VI-TREATMENT OF THE ELECTRIC AND ELECTRONIC
APPLIANCES AT THE END OF LIFE
Application in the countries belonged to the European Union and in other European
countries which have a selective collect system. This symbol on the product or on its
packaging indicates that this product shall not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about recycling of this
product, please contact your local city office or your household waste disposal service. The
packaging material is recyclable. Eliminate the packaging in an environmentally friendly way and
make it available to the recycling collection service.
The water tank is empty
The water tank is not full
enough
The temperature is not set
properly
The iron is not in the right
position
The water tank is not full
enough
The temperature is not set
properly. It is too low to
produce steam
The jet function has been
used too long
There are lime deposits on
the soleplate
Add water in the tank, leave
the iron to warm up and activate the steam
The water tank must be at
least ¼ full
The temperature must be
right on steam.
Hold the iron horizontally
and start the pump
The water tank must be at
least ¼ full
The temperature control knob must be set on
steam. Wait until the iron is hot enough
Let the iron warm up
Use the auto-clean function
44