Orbitalum 790 048 765 Traducción Del Manual De Instrucciones Original página 12

enGLISH
Mounting the Tripod
3. MOUnTInG THe TRIpOd
X Assemble the Tripod as shown in the figure.
X When mounting and transporting the Tripod ensure that all the screws at the clamping parts (2), the clamping sleeves (6) and
at the base plate (12) are fastened tight.
X During mounting and after every transport of the Tripod ensure that both tubes (5+9) are pushed to the middle (edge-to-
edge) of the clamping sleeves (6) and fastened. This ensures secure standing of the Tripod.
X The base plate (12) has to be mounted onto the left-hand leg before every use of the Tripod.
7
14
13
2
12
12
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
1
6
8
5
8
9
6
8 4
11
AppARATeSTändeR/TRIpOd
6
[REV. 20190506] OC_Tripod_BA_790048765_00__INH-02_EN
2
3
4
5
6
9
10