DAITEM 221-21X Manual De Instalación página 101

5.4 To be filled in according to the application(s) to be performed
Configuration sequence
LED indicator
lamp ON
LED indicator
lamp OFF
approx. 10 sec.
sequence
To start the
sequence press
& hold the key until
the LED indicator
lamp goes out
Application Loop Parameter n°
n° 1
n° 2
approx.
Press the key as many Press & hold
times as the required the key until the
LED indicator
parameter number
lamp temporarily
goes out
Parameter value
1
2
3
4
5
6
7
9
1 2
st 1 sec nd
1 sec
5 sec.
digit digit
( )
*
Press the key as many times
as the required parameter number.
(*) Wait one second between
digits
IMPORTANT: each loop must be configured.
3
rd
approx. 10 sec.
digit
( )
*
To end the
sequence press
& hold the key until
the LED indicator
lamp goes out
approx.
2 sec.
LED indicator
lamp remains
ON =
configuration
programmed
101