BGS technic 69505 Instrucciones De Uso página 3

ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
DESCRIPTION
•
for professional removing of glued car windshields
•
wire pull system with deflection pulley
•
150 mm suction discs with hand pump provide a firm grip on the windshield
•
cutting wire reel with 10 mm (3/8") drive
•
max. suction head capacity: 50 kg (per head)
•
to be used with e.g. window cutting wire (BGS 8583)
SAFETY INFORMATIONS
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set..
OCCUPATIONAL SAFETY
When using this tool,
always wear following protective equipment:
•
Safety glasses
•
Anti-slip safety shoes
•
Work gloves
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Windshield Removing Tool Set
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 69505
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed