Product Specifications Betex Iductor 1 And Iductor 2; Power Supply; Working Environment; Instructions - BETEX iDuctor 1 1200W Manual Del Usuario

2. Product specifications BETEX iDuctor 1 and iDuctor 2

2�1 Power supply
• voltage: 230VAC +/- 10%
• frequency: 50 – 60 Hz
• output: Betex iDuctor 1, 1200W / iDuctor 2, 2300W
• the use of a generator is permissible if it is able to deliver adequate power and the
output delivers clean sinus form voltage in the correct frequency range (50 - 60 Hz).
• safety class: Class I
WARNING!
The unit must always be connected to a supply network with a fuse rated
at at least 10A and at most 16A. The unit does not have an internal fuse. An
earth bonded wall socket should always be used on safety grounds (Class I).
WARNING!
The unit does not feature an on/off switch, as soon as the plug is inserted in
the socket the unit will be powered up.
2�2 Working environment
• temperature: -5°C to +40°C
• humidity: 0 – 90%, non-condensing
• IP 20
• no higher than 2,000 metres above sea level

3. Instructions

3�1 Pictograms
The pictograms appearing on the iDuctor have the following meanings:
Caution! This equipment generates a magnetic field which can erase
magnetic data from credit cards and the like.
Caution!
Not to be used by persons with a pacemaker.
Caution!
This equipment includes components which may reach high temperatures.
6 © BETEX Tools