Users - BETEX iDuctor 1 1200W Manual Del Usuario

3�2 Users
CAUTION!
The iDuctor must not be used by persons in the following groups:
• users with a pacemaker;
• users with psychiatric or physical impairments whose use of the
equipment would present a hazard to the user or their environment;
• users below 16 years of age without the supervision of an adult.
3�3 Instructions for use
The following must be checked before the equipment is connected to the mains supply:
• the original mains lead with its IEC Lock is connected (in case of doubt, contact the
supplier)
• the iDuctor is undamaged (no cracks or holes in the housing);
• only original iDuctor coils are used, manufactured in accordance
• with the manufacturer's specifications.
A coil or flexible coil must be connected to the unit. This connection is extremely robust
thanks to the patented clamping mechanism. Coils and flexible coils are connected or
removed by simultaneously depressing both buttons on the side of the unit. It is also
possible to lie the unit down flat so that both buttons can be depressed with a single
motion. An alternative method is to place the unit between the legs and depress the
buttons with the knees, keeping both hands free.
The coil's contact points are then fully inserted in the holes at the front of the iDuctor.
The buttons should then be released. The patented clamping mechanism will ensure that
the spiral is held very firmly in place. Before using the unit check that the contacts have
been fully inserted and that the connection is tight.
CAUTION!
Select a coil which will fit closely around the object to be heated without
touching it. This allows the optimal transfer of magnetic energy so that
the object heats up as fast as possible, as well as preventing the coil's
protective sleeve from being damaged by contact or wearing faster due
to overheating.
© BETEX Tools
EN
DE
ES
FR
NL
IT
7