Publicidad
Step 4
å
Turn eight BLACK 9/16" FLAT HEAD SCREWS (32S) into the
ENDS (A and B) until the shoulders of the SCREWS rest on the
surfaces of the ENDS.
å
Slide the END MOLDINGS (L and M) onto the ENDS (A and B) until
they are even with the edges of the ENDS. Line up the grooves in
the MOLDINGS over the heads of the SCREWS in the ENDS.
B
These edges
should be even.
Page 8
Shoulder
L
M
BLACK 9/16" FLAT HEAD SCREW
(8 used in this step)
A
Shoulder
32S
414444
L
M
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
www.sauder.com/services
Publicidad
