Sauder 427565 Instrucciones De Montaje página 19

Step 14
1
L
Groove
D33
å
Pull the DRAWER FRONT BRACKETS (10G) apart and slide
four into the grooves in the DRAWER SIDES (D32 and D33).
You may need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH"
and "LH" for easy identification.
å
Fasten the DRAWER FRONT (L) to the DRAWER FRONT
BRACKETS (10G). Use four BLACK 9/16" LARGE
HEAD SCREWS (1S).
3
1
M63
Surface with
HIDDEN CAM
å
Fasten the DRAWER BRACE (M63) to the DRAWER
FRONT (L). Tighten one HIDDEN CAM.
www.sauder.com/service
Tap down with your
screwdriver and hammer.
D32
10G
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
Hidden part using
recycled material.
Color may vary.
L
2
D33
1S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide the DRAWER BOTTOM (D729) into the
grooves in the DRAWER SIDES (D32 and D33) and
DRAWER FRONT (L).
4
D33
M63
å
Fasten the DRAWER BACK (D61) to the DRAWER
SIDES (D32 and D33) and DRAWER BRACE (M63).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
427565
11
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
D729
U n fi
n i s h
e d
s u r
f a c
e
L
D32
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
D61
Be sure the
DRAWER
BOTTOM
D32
inserts into
the DRAWER
BACK groove.
Page 19