Control Panel Guide - Drive Medical PreserveTech RTL12C006-WH Manual De Instrucciones

1. Disconnect the existing water supply hose underneath
the sink
2. Ensure o-ring is placed in the mini adapter
3. Attach the mini adapter to the warm water supply
valve and screw the flexible steel hose to the top
connection
4. Attach provided warm water supply hose to the
mini adapter's side connection
STEP 5 – COMPLETING WATER CONNECTIONS
1. Attach the cool water supply hose provided to the cool water port underneath
the bidet control panel
2. Attach the warm water supply hose provided to the warm water port under-
neath the bidet control panel
TIPS
• Wrap teflon tape tightly around threads to create a watertight seal
• Tighten by hand to avoid stripping the connection threads
STEP 6 – FINAL CHECK
1. Check connections are properly secured
2. Turn on the water supply line behind the toilet and under your sink

control panel guide

- 4 -
Water Temperature and
Pressure Control Lever
Cool Temperature Water
and Pressure Control
Warm Temperature Water
and Pressure Control
Nozzle Cleansing Mode
Rear Cleansing Mode
Function Control Knob
Female Cleansing Mode