Overheat Safety Feature; Included Accessories - Danby Designer DDEF02213BD13 Manual Del Propietário

OPERATING INSTRUCTIONS

OVERHEAT SAFETY FEATURE

This fi replace is equipped with an overheat safety feature. When the
fi replace's internal components reach a certain temperature that could
cause overheating and possible fi re, the fi replace will automatically shut
off. Operation can only resume when the user resets the fi replace.
To reset the fi replace, ensure the power is turned off, unplug the unit and
wait 15 to 20 minutes for the internal components to cool down.
Follow the instructions for use to return the fi replace to normal
functioning.
WARNING: It is normal for the power cord to feel warm to the touch;
however, a loose fi t between the outlet and the plug may cause
overheating of the plug. If this occurs, try inserting the plug into a
different outlet. Contact a qualifi ed electrician to inspect the original
outlet for damage.

INCLUDED ACCESSORIES

• Electric fi replace with heater
• Remote control
• Clear crystals
• Wall hanging bracket
• Wall hanging bracket hardware:
• 4 x 45 mm screws x3
• Three screw expansion brackets
• 4 x 12 mm screws x2
• Two feet
• 4 x 16 mm screws x8 (to assemble feet)
3