Common Problems And Solutions - Potensic T25 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
● Camera
Lens: FOV 120° / 2.0
Still Photography Modes: Single shot
Video Recording Modes: 2048*1152 P
Photo: JPEG
Video: AVI
Supported SD Cards: TF Card 8 GB (not included)
Operating Temperature: 32 ~ 104 °F ( 0 ~ 40 °C )
● APP / Live View
Mobile App: Potensic-G
Live View Working Frequency: 2.4 GHz ISM
Latency: Low Latency Video (depend on conditions and mobile device)
Required Operating Systems: iOS 8.0 or later / Android 4.4.4 or later
Recommended Devices: 4.7˝ to 5.5˝ Smart phones
● Transmitter
Operating Frequency: 2.4 GHz
Max transmission distance: 300 m (Outdoor and unobstructed)
Operating Voltage: 3.7 V
Mobile Device Holder: 4.7˝ to 5.5˝ Smart Phones
Operating Temperature: 32 ~ 104 °F ( 0 ~ 40 °C )
● Flight Battery
Capacity: 1000 mAh
Voltage: 3.7 V
Battery Type: Lipo
Energy: 3.7 Wh
Net Weight: 40 g / 1.4 oz
Max Charging Power: 5 ~ 10 W
Max Charging Time: About 60 minutes (Depending on Charging Power)
Charging Temperature Range: 14 ~ 104 °F ( -10 ~ 40 °C )
● USB Cable
Voltage: 5 V
Rated Power: ≤10 W
Blade * 4
Landing Gear * 2
THE PROBLEM
Drone lights flashing and no response from the
drone when operating.
The blades spin, but the drone cannot takeoff.
The quadcopter shakes heavily.
Drone cannot stay balanced in flight.
Drone is unstable after crashing.
PARTS LIST (Included)
USB Cable * 1 (Only for charging)
Blade Cap * 2

COMMON PROBLEMS AND SOLUTIONS

REASON
1. Remote is not synced to the drone.
2. Insufficient battery power.
1. Insufficient battery power.
2. The blades distorted.
The blades distorted.
1. The blades distorted.
2. The motor doesn't work properly.
Three-axis acceleration sensor loses it's
balance after crashing.
Screw Driver * 1
Wrench * 1
(for taking the landing rack down)
1. Refer to the Quick Start guide and re-sync the drone.
2. Recharge the battery.
1. Recharge the battery.
2. Replace the blades.
Replace the blades.
1. Replace the blades.
2. Replace the motor.
Restart and re-calibrate the drone.
08
Propeller Gear * 2
Screw * 4
COUNTERMEASURES

Publicidad

Tabla de contenido
loading

Tabla de contenido