HammerSmith 234820 Instrucciones De Uso página 14

prolonged use.
• Wear a dust mask when
operating in a dusty
environment.
• Before sanding, make sure that
any nails, screws or other metal
objects protruding from the
workpiece have been removed.
• Always inspect walls and
ceilings before drilling and
screwing to avoid damage to
potentially concealed power
cables and pipes.
• Use screw clamps or other
suitable clamping devices to
fix the workpiece firmly to the
surface and to prevent it from
slipping.
• Only use attachments that are
supplied for the Hammersmith
MultiTool.
• Do not use broken, damaged
or worn accessories or
attachments. Only use
attachments that are in good
working condition.
• Always start the device in a
suitable space, and allow it to
reach the optimum speed before
introducing it to the workpiece.
• Always remove the battery pack
from the device before changing
attachments.
• Keep your hands out of the work
area, and always cut away from
yourself and other people.
Insertion and removal of the saw blade
1. Fix the tool in place by moving the direction switch to the
middle position.
2. To insert the saw blade, push the lever to the left and hold it
in this position.
3. Insert the saw blade into the saw blade clamp. Ensure that the
teeth face forward.
4. Release the lever.
5. To remove the saw blade, push the lever to the right and pull
the saw blade away from the holder.
6. Always use a saw blade suited to the respective workpiece and
the desired type of cut.
7. If necessary, drill a hole in the vicinity of where the cutting
process will be started.
There is no need to cut a hole when sawing wooden
workpieces:
1. Mark the desired starting point.
2. Fold the tool forward and place the rounded front edge of the
saw shoe onto the workpiece.