Main Components; Application - Schulz MIS 100 Manual De Instrucciones

5. MAIN COMPONENTS

2
3
1. Equipment On Indicator
2. Digital display of current indicator
3. Processor selector button (Dry TIG / MMA)*
4. Current adjustment potentiometer
5. Positive output terminal
6. Negative output terminal
7. Overheat/fault indicator
8. On/Off button
9. Power cord
*Only in MIS 100 model

6. APPLICATION

6.1 Welding in electrode mode (MMA)
Ground Cable Connection – To weld, mount the ground cable Connector to the Negative (-) pole;
Electrode holder connection – the electrode holder must be connected to the positive (+) pole.
1
7
6
5
FIGURE 1
8
4
9
34
FIGURE 2