Zyxel G-360 Manual Del Usuario página 9

ENGLISH
here) in order to associate with it. Traditionally this meant that you had to configure
the settings on the AP and then manually configure the exact same settings on each
wireless client.
OTIST (One-Touch Intelligent Security Technology) allows you to transfer your
AP's SSID and WEP or WPA-PSK security settings to wireless clients that support
OTIST and are within transmission range. You can also choose to have OTIST
generate a WPA-PSK key for you if you didn't configure one manually.
7 Enabling OTIST
You must enable OTIST on both the AP and wireless client before you start
transferring settings.
We use the Prestige 334WT and the ZyXEL G-360 screens in this guide as an
example. Screens may vary slightly for your ZyXEL devices.
The AP and wireless client(s) MUST use the same Setup
key.
7.1 AP
You can enable OTIST using the Reset button or the web configurator. If you use
the Reset button, the default (01234567) or previous saved (through the web
configurator) Setup key is used to encrypt the settings that you want to transfer.
Hold in the Reset button for one or two seconds.
7