EcoFlow Smart Home Panel Manual De Instalación página 12

No.
Connect the DELTA Pro and Smart Home Panel using the Infinity cable. For
8
split-phase, two DELTA Pros and two infinity cables are required. Turn on the
main power button of DELTA Pro, then press the On/Off button (AC button,
near the infinity port) on the SHP to enable each DELTA Pro.
Switch the power supply from grid to power station for each channel via
9
the app. Check whether the switchover is successful and there are no errors
reported on the app. Follow the instructions on the app to fix the errors if
any.
Set up the charging for DELTA Pro on the app (if AC grid charging is desired),
10
check whether the DELTA Pro is recharged successfully and there are no
errors reported on the app. Follow the instructions on the app to fix the
errors if any.
9
Checklist Status