Assembly Instructions - Blue Clean BC383HSS Instrucciones De Montaje

PREPARATION PREPARATION
Before beginning assembly of product, make sure
all parts are present. Compare parts with package
contents list and hardware contents list. If any part is
missing or damaged, DO NOT attempt to assemble the
product.Please call customer service at 1-866-235-
5112. Replacement parts will be sent no charge.
Estimated Assembly Time: 5 minutes.

ASSEMBLY INSTRUCTIONS

1
B
A
Power Unit Assembly
Slide the spray gun holster (B) onto left side, when
facing the power washer unit (A).
95505_IM_BC 383 HSS_ENG-FR-SP.indd 7
Tools Required for Assembly (not included): Phillips
screwdriver.
2
AA
E
Slip tab into slot and screw the nozzle tray (E) on
bottom left, when facing the power washer unit (A).
Secure with screw (AA).
Note: DO NOT use a power screwdriver. When the screw
is completely tight, give a small final clockwise twist of
the screwdriver. DO NOT overtighten.
Note: When placing the gun with the lance attached, the
nozzle will rest in this tray.
Hardware Used:
Screw
AA
A
x 1
7
2020/5/22 下午3:40