HIKOKI NR 3675DD Instrucciones De Manejo página 13

NAMES OF PARTS (Fig. 1–Fig. 26)
Top cover
Trigger
Firing head (outlet)
Push lever
Nail feeder (A)
Feeder knob
Magazine
Hook
Battery
Lock lever
Handle
Information indicator
Nailing operation switch
Power indicator
Power switch
Nailing operation indicator
Nails
Adjuster
Hook plate
Remaining battery indicator switch
Remaining battery indicator lamp
Display panel
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
NR3675DD: Cordless Duplex Nailer
To reduce the risk of injury, user must read
instruction manual
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Direct current
Switching ON
Switching OFF
Disconnect the battery
Power switch
Power switch OFF
Power switch ON
Power indicator: Light in green
Nailing operation switch
FULL SEQUENTIAL ACTUATION
MECHANISM
FULL SEQUENTIAL ACTUATION
MECHANISM mode
Nailing operation indicator: Light in blue
CONTACT ACTUATION MECHANISM
CONTACT ACTUATION MECHANISM mode
Nailing operation indicator: Blink in blue
Trigger locked
Trigger unlocked
The battery remaining power is nearly empty.
Recharge the battery as soon as possible.
Information indicator:1 LED (Red) blink
Contact HiKOKI for inspection.
Information indicator: 2 LEDs blink in
Orange, after 10 seconds, automatically turn
off Power switch.
Shallow side
Deep side
Warning
Prohibited action
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
13
English