WUBEN Knight X-0 Manual Del Usuario página 11

Reset:
When the flashlight is locked, single click the button--interval
0.5s--double click the button--interval 0.5S--triple click the
button, the flashlight is reset to Low mode, indicating that
button lock is released, and brightness is reset to default.
Maintenance
The O-Ring may be damaged after a long time use, please
replace the O-Ring in time to ensure the waterproof level
of the product.
Please use WUBEN battery or WUBEN recommended
batteries.
When the product indicates low power, please charge or
replace the battery in time to avoid affecting the durability
of the battery.
Please use alcohol and rag to clean the conductive parts of
the product in time.
When not in use for a long time, please remove the
battery to prevent the battery from leaking or exploding.
Please store the product in a dry and ventilated place.
FAQs
Problems Causes
Check if the switch is
locked
Check if the switch is
turned on correctly
Abnormal
flash or
Check if it is assembled
failure to
in place
turn on
Check if the battery is
no power
Solutions
Unlock the switch
Turn on the switch
Tighten the assembly
parts
Try the battery on
other products
- 08 -
E
N