Installation - Klarstein WONDERWALL SANTORINI SMART Manual Del Usuario

EN
24

INSTALLATION

The kit supplied is designed for vertical or horizontal mounting on a solid wall.
For mounting on other walls, you need suitable fasteners (not included in the
scope of delivery). Make sure that the wall is suitable for mounting. We strongly
recommend having the panel installed by a qualified electrician or an authorised
specialist company. The heater must be at least 20 cm away from all objects, walls,
etc. The distance to the floor must be at least 20 cm.
Note: Before installation, you should attach the guard to the heater for safety
reasons.
Note: This heater is designed for horizontal or vertical wall mounting only. It is
not permitted to mount the unit in any other position.
1. Measure the distance between a and b.
2. Mark the position on the wall.
3. Drill the holes in the wall.
4. Insert the dowels into the holes.
5. Screw the supplied bracket to the wall.
6. Hang the panel in the holder.
7. Tighten the screw to ensure that the panel is securely fastened.