Craftsman professional 247.381091 Manual Del Operador página 9

3. The rope guide, which is connected to the support rod, is located
on the right side of the lower handle. See Figure 3 below.
A. Hold blade control against upper handle.
B. Pull starter rope out of the engine. Release blade control.
C. Slip starter rope into rope guide.
D. Use cable tie to secure cables to lower handle. Press cables
into the upper cable guide on the lower handle.
Attaching the Grass Catcher
The mower was shipped with the mulching baffle installed on the unit.
For bagging purposes, you will have to attach the grass bag and its
adapter in place of the mulching baffle.
1. Remove three wing nuts holding the mulching baffle in place and
remove from unit.
2. Replace with grass bag adapter, while making sure the front lip of
adapter goes under the edge of the deck. See Figure 4. Secure
with wing nuts previously removed.
3. Lift chute door on the grass bag adapter and slide grass bag onto
the adapter. See Figure 5.
C
ASSEMBLY
A
B
D
Figure 3
D
9
Figure 4
Figure 5