G-ST 500+
Front Panel I/O Functions
On G-ST 500+, plenty of I/O functions are provided on front panel and back panel so you can
easily access them. Most common computer I/O functions are placed on the front panel. In this
section, we'll illustrate each I/O function on the front panel.
No.
Item
DisplayPort 1 & 2
1
2
DVI port
3
VGA port
USB 3.0 port
4
GbE ports
5
6
On/ off control &
status output
2.5" HDD tray
7
key lock
2.5" HDD tray
8
9
PoE+ GbE port
10
System status
LEDs
11
Power button
12
Reset button
Support display resolutions up to 4096 x 2304. Compatible with HDMI/
DVI via respective adapter/ cable (support resolution may vary).
DVI-D output supports resolution up to 1920x1200@60Hz and is compa-
tible with other digital connections via an adapter
VGA output supports resolution up to 1920x1200@60Hz
USB 3.0 port supports up to 5 Gbit/s data transfer bandwidth.
Gigabit Ethernet ports offer fast network access.
Allows for external switch extension when the system is
placed inside a cabinet.
The lock prevents unauthorized or accidental HDD removal
The HDD expansion tray offer storage expansion capabilities.
Applicable to 5108VTC system only, Power over Ethernet
(PoE) port can provide both data connection and electric power to de-
vices (eg. IP camera).
Four system LEDs, Ignition control (IGN), Watchdog Timer
(WDT), Hard Disk Drive (HDD) and Power (PWR).
Use this button to turn on or shutdown the system.
Use this button to manually reset the system.
10
Back to the
table of contents
Description