Working With The G-St 500; Overview - Geutebruck G-ST 500+ Manual De Instrucciones

G-ST 500+

Working with the G-ST 500+

Overview

After the G-ST has been started and successfully integrated into a network,
you can work with the device. The G-ST uses the following applications
which can be opened using the start bar or from the desktop using a double
click:

There are three integrated wizards, which help you to set up your sys-
tem:
G-Set can be started on the client side or directly on the server. If you have
Working with
opened G-Set on a workstation computer, in the program you must create
G-Set
and save a corresponding connection on the server.
G-Set is the G-ST setup client. In this Windows interface, you set the
recording parameters, modify and assign passwords and access
rights and add additional users for the system.
Connection Wizard

Here you create, manage and verify connections to servers
(Password, Ping, Connection).
Media Channel Wizard

You can see, report and manage all available cameras on the net-
work
Event / Alarm Wizard

Events and alarms are created and managed here.



38
Back to the
table of contents