Wood Stud Installation; Important - LEGRAND Sanus LLF225 Manual De Instrucciones

STEP 2A Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
• Drywall covering the wall must not exceed 5/8 in. (16 mm)
• Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
• Stud center must be verified
1
Max.
5/8 in. (16 mm)
16 in.
(406 mm)
3
07
IMPORTANT: Be sure to drill into the center of the stud.
6
Min.
2 ¾ in. (70 mm)
7/32 in.
(5.5 mm)

Wood Stud Installation

2
4
08
09
CAUTION:
Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
Tighten the lag bolts 09
against the wall plate 08
10
4X
09
10
only until the washers are pulled FIRMLY
. DO NOT over-tighten the lag bolts
07
.
09 .
Go to STEP 3 on PAGE 8.