LEGRAND Sanus LLF225 Manual De Instrucciones página 7

STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
• Mount wall plate directly onto concrete surface (no wall covering)
08
• Minimum solid concrete thickness: 8 in. (203 mm)
• Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
1
3
CAUTION:
Be sure the anchors C1 are seated flush with the concrete surface.
Fischer UX10 x 60R C1 - included in the Concrete Installation Kit CMK1.
C1
Solid Concrete or Concrete Block Installation
2
07
3 in. (7.6 cm)
3/8 in.
(10 mm)
CAUTION:
4
08
002862.eps
CAUTION:
Improper use could reduce the holding power of the lag bolt
Tighten the lag bolts
against the wall plate
Concrete Installation Kit CMK1 is not included
Contact Customer Service at 1-855-734-7805
to inquire about the additional hardware.
Never drill into the mortar between blocks.
10
09
Avoid potential personal injury or property damage!
only until the washers
09
08 . DO NOT over-tighten the lag bolts
07
4X
09 .
10
are pulled FIRMLY
09 .
7