Other Functions - Johnson JSC8B Manual De Usuario

OPERATIONS
Delay start
Speed dry indicator
Anti-crease mode
Remaining Time indicator/Error message
Cycle phase status
Clean filters (warning)
Empty water container (warning)
Dryness level (four grades)
Signal indicator
Programme selector
1.Press the【On/Off 】 button ,when the LED display screen brightens up, rotate
the programme knob to select the desired programme.
2.Select the【Delay】,【Time】,【Intensity】,【Speed Dry】,【Signal】or
【Anti-Crease】 functions for additional option.
3.Press the【Start/Pause】button.
Programme start
The drum will keep rotating after the programme starts, the state light in the
display area will flash in sequence, the remaining time displayed will change
automatically.
Programme end
1.The drum will stop running after the programme ends,
the display will show " ", the last cycle phase status light will flash. The
【 】function
dryer will start Anti-crease
1 minute (refer to page 15). Please press
pull the plug out.
2.Deal with the problem accroding to "Malfunction display and solutions , if
there is a unexpected stop during the drying procedure and the dryer show
information(refer to page 20 ).
V.1
Time
Child lock
My cycle
the buzzer will beep,
if user doesn't remove the load in
【On/Off】
key to cut off power and
"
13
OPERATIONS

Other Functions

• Instructions of the 【Delay】 function
This function is used for delaying clothes drying time within 24 hours. The delay time
means the programme will start after x hours. When the delay programme starts, the
time starts to decrease on the display and the delay icon blinks.
Steps in details
1. Load your laundry and make sure the machine door is closed.
2. Press the 【On/Off】button,then to turn the programme selector knob and select a
desired programme.
3. You can select the 【Anti-Crease】 or 【Signal】functions according to your need.
4. To press the 【Delay】 key.
5. Continue to press the 【Delay】to select the delay time.
6. After the 【Start/Pause】 button is pushed, the dryer is at the run condition. The
drying procedure will be automatically performed when the delay time is over.
7. If you push the【Start/Pause】button again, the delay function will be paused.
8. If you want to cancel the "Delay" function, please press the 【On/Off】button.
• Instructions of the 【Time】function
When the warm or cool or refresh programme is selected, the 【Time】button can be
used to adjust the drying time in 10 min. steps.
• Instructions of the 【Intensity】function
Used to adjust the dryness level of the laundry. The level has four grades .
The drying time increases minutes in every grade. 5
1. The intensity function can be activated only before the programme start.
2. Press the 【Intensity】button repeatedly to select the drying time.
3. Except the 【Cotton Iron】【Qucik】【Synthetic Iron】【Warm】【Cool】
【Refresh】,all the other programmes can be the【Intensity】function.
• Instructions of the 【Speed dry】
Depending on the dryer model
Use to curtail shorten the drying time, the 【Cotton Extra】【Cotton Standard】
【Mix】【Jean】programme can be set the function. Use to curtail shorten the
drying time, the 【Cotton Extra】【Cotton Standard】【Bed linen】
【Jean】programme can be set the function.
V.1
14