Technical Data, Markings - ALFRA TML 500 Manual De Instrucciones

TECHNICAL DATA
Prod.-No.
Designation
Breakaway force
Max. load-bearing capacity:
(on flat material
with safety factor 3:1)
Max. load-bearing capacity:
(at 6° inclination acc. to
EN 13155with safety factor 3:1)
Max. load-bearing capacity:
(at 90° inclination of the
load with safety factor 3:1)
Dead weight of the magnet
Storage temperature
Operating temperature
MARKINGS ON THE LIFTING MAGNET
Additional detailed descriptions for handling and operating conditions can be found on both sides of the
lifting magnet. This labeling must not be modified, damaged or removed, as otherwise the manufacturer
cannot be held responsible for any personal injuries, property damage or accidents resulting from this fact.
New labels must be ordered from the manufacturer if necessary.
41500
TML 500 Lifting magnet
>1500 kg from 15 mm S235
500 kg from 15 mm S235
440 kg from 15 mm S235
150 kg from 15 mm S235
7.3 kg
-30°C to +60°C
-10°C to +60°C
>3300 lbs from 1⁄2" AISI CRS 1020
1100 lbs from 1⁄2" AISI CRS 1020
950 lbs from 1⁄2" AISI CRS 1020
330 lbs from 1⁄2" AISI CRS 1020
16 lbs
-22°F bis +140°F
+14°F bis +140°F
15