TECHNICAL DATA
Prod.-No. and description
Max. punching force
Max. hydraulic pressure
Hydraulic medium
Piston stroke
Tool mounting
Weight:
Compact
Straight Punch Driver
®
CompactCombi
90° Punch Driver
®
Compact Flex
Punch Driver
®
Other functions
DESCRIPTION
The Compact
Straight Punch Driver, CompactCombi
®
are hand-operated hydraulic devices for making holes of different shapes in soft to medium-strength steel,
stainless steel and aluminium sheets. ALFRA punch drivers are low-maintenance thanks to the closed
hydraulic circuit and enable you to work with in any position.
The hand lever (F) and the stable handle (E) are designed on ergonomic principles to ensure perfect handling
of the punch driver. Working pressure inside the pump body (D) and the cylinder (B) is built up and released
by the drain screw (C). The drain screw (C) can be opened by turning it to the left into the OFF position and
closed by turning it to the right into the ON position. By pressing the hand lever (F) when the drain screw
(C) is closed, the necessary working pressure is built up, which pulls the load piston (A) inwards into the
cylinder (B) with great force. The pressure is released by opening the drain screw (C) and the load piston (A)
is pushed back into its starting position by means of an internal spring. The integrated excess pressure valve
limits the maximum attainable pressure within the device and protects the hydraulic punch from excessive
use and damage.
Perfect punching results are achieved using the suitable ALFRA tools. An overview of our range of quality
round and square punches can be found at the end of this operating manual.
10
02005 - Compact
Straight Punch Driver
®
02055 - CompactCombi
02066 - Compact Flex
®
75 kN
680 bar
HLP32 hydraulic oil
18 mm
19 mm
1.45 kg
1.75 kg
1.97 kg
Excess pressure safety valve up to 680 bar
90° Punch Driver and Compact Flex
®
90° Punch Driver
®
Punch Driver
16800 lbs
9850 psi
0.7"
3⁄4" – 16 UNF
3.15 lbs
3.85 lbs
4.33 lbs
9850 psi
Punch Driver
®