Publicidad
Enlaces rápidos
Model/Modelo/Modéle
T67330 & T67430
Series/Series/Seria
Virage
®
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
1/8" (3.17mm)
For easy installation of your Delta
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To complete the deck and valve rough-in prior to
installing this trim kit.
Para instalación fácil de su llave Delta
usted necesitará:
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Para completar el borde y la instalación de
válvulas dentro de las paredes previa a la
instalación de la llave y sus accesorios.
Pour installer votre robinet Delta
facilement, vous devez:
• LIRE TOUTES les instructions avant de début-
er;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Installez le corps du robinet et terminez le
pourtour du bain avant de poser les accessories
de finition.
www.brizo.com
85563
3/32" (2.38mm)
"The Commonwealth of Massachusetts requires all hand-held shower sprays to comply with the Massa-
chusetts State Plumbing Code 248 CMR whereby their installation shall include a device that limits the
maximum deliverable temperature of hot water to 110°F and an approved backflow prevention system ."
"La Commonwealth de Massachusetts requiere todos los aerosoles de mano de la ducha conformarse
con el código 248 CMR de la plomería del estado de Massachusetts por el que su instalación incluya
un dispositivo que limite la temperatura entregable máxima de la agua caliente a 110°F y a un sistema
aprobado de la prevención de la expulsión."
« Le Commonwealth du Massachusetts exige de tous les pulvérisateurs tenus dans la main de douche
d'être conformes au code 248 CMR de tuyauterie d'état du Massachusetts par lequel leur installation
inclue un dispositif qui limite la température livrable maximum de l'eau chaude à 110°F et à un système
approuvé d'empêchement de refoulement. »
TWO HANDLE ROMAN TUB TRIM
LLAVE Y SUS ACCESORIOS
PARA BAÑERA ROMANA DE DOS
MANIJAS (MANERALES)
ACCESSOIRES DE FINITION DE
ROBINET À DEUX POIGNÉES POUR
BAIN ROMAIN
T67330
86653
1
T67430
1/8" (3.17mm)
3/32"
(2.38mm)
09/27/2022 Rev. B
Publicidad
Manuales relacionados para Brizo Virage T67330
Resumen de contenidos para Brizo Virage T67330
- Página 1 à 110°F et à un système • Installez le corps du robinet et terminez le approuvé d’empêchement de refoulement. » pourtour du bain avant de poser les accessories de finition. 86653 www.brizo.com 09/27/2022 Rev. B...
-
Página 2: Cleaning And Care
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. LIMPIEZA Y CUIDADO DE SU LLAVE Tenga cuidado al ir a limpiar este producto. - Página 3 T67330 T67430 TURN OFF WATER SUPPLIES. Model T67330 & T67430 Note: The deck and valve rough-in must be finished before installing the trim kit. Look for handle bases (the 2 with the smaller diameter hole) and place one base (1) over the cold side valve (2). Note: If deck is uneven, silicone can be used under the gasket on the base.
- Página 4 T67330 T67430 3/32" (2.38 mm) 3/32 po T67330 T67430 Model T67330 Model T67430 Unscrew the test cap (1) and discard. Remove set screw (1). Remove and discard test cap (2). Look for the spout base (the one with the larger hole with 2 flats) and place Look for the spout base (the one with the larger hole with 2 flats) and place base (1) with the two flats facing toward the end valves over base (1) with the two flats facing toward the end valves over the spout shank...
- Página 5 T67430 T67430 T67430 T67430 For Model T67430 Only Remove conical nut (1) from handshower nest (2) and insert braided metal hose through the handshower nest. Reassemble test cap (3) to braided hose to hold hose in place. Apply silicone to bottom of nest (2). Place nest Insert the lift rod assembly (1) into the spout and screw it into the over mounting piece (4) and align in selected direction.
- Página 6 T67330 T67430 T67430 T67430 Model T67330 Model T67430 Remove spout tip and gasket (1) with wrench (2) provided. Turn faucet Pull hose (1) to its farthest extension and point it down into the tub. Pull handles (3) all the way on. Turn on hot and cold water supplies and flush the lift rod (2) up to the full on position and flush water lines for one minute.
-
Página 7: Mantenimiento
RP40668 Diverter Assembly Ensamble del Desviador Dérivation Maintenance If faucet does not divert water from the spout to the hand shower, check that the lift rod (1) is securely threaded into the diverter (2). If the problem persists If faucet leaks from spout outlet–Shut off water supplies– remove the lift rod and spout. - Página 8 Brizo Kitchen & Bath Company Masco Canada Limited, Plumbing Group application” refers to the purchase of the faucet from an authorized Brizo seller by a purchaser who owns but does not live in the residential 55 E. 111th Street Technical Service Centre...