Cleaning And Maintenance; Technical Specifications - Beurer SR BF 1 Instrucciones De Uso

Display
No Bluetooth
con-
®
nection ( symbol is
missing).

14. Cleaning and maintenance

Empty, completely flat batteries must be disposed of through specially designated collection boxes, recy-
cling points or electronics retailers. You are legally required to dispose of the batteries.
The codes below are printed on batteries containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
For environmental reasons, do not dispose of the device in the household waste at the end of its service
life. Dispose of the device at a suitable local collection or recycling point.
Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic
Equipment). If you have any questions, please contact the local authorities responsible for waste
disposal.
Dispose of packaging in an environmentally friendly manner.

15. Technical specifications

Model:
Dimensions:
Weight:
Measurement range:
Scale interval d:
Repetition accuracy:
Absolute precision:
Cause
Device outside the range.
No connection to the app.
User memory space is full.
New measurements overwrite
the older measurements.
The batteries in the scale are
empty.
SR BF 1
30 x 30 x 2.1 cm
1.6 kg
5-180 kg
The display can be read in increments of 0.1 kg.
The measuring tolerance for repeated measurements is
+/- 0.4 kg (several measurements in direct succession on
the same scale with position of scale and person the same
as far as possible).
In comparison with a calibrated weight, the measured value is
+/-1% +0.1 kg. E.g. at 40 kg this corresponds to +/- 0.5 kg; at
100 kg this corresponds to +/-1.1 kg.
Solution
The range in the open is approx. 15 m. Walls
and ceilings reduce the range.
Other radio waves may interfere with the
transmission. Therefore, do not position the
scale near devices such as WIFI routers,
microwaves, induction hobs etc.
Completely close the app (including in the
background).
Switch Bluetooth
Switch the smartphone off and back on again.
Remove the batteries in the scale for a short
period and reinsert them.
See FAQs at www.beurer.com.
Open the app. The data is transferred auto-
matically. This may take up to one minute.
Replace the batteries in the scale.
20
PAP
25
off and back on again.
®