Connecting And Operating; Connecting; Switching On - Dirt Devil AC150 Manual De Instrucciones

3 Connecting and operating

3.1 Connecting

WARNING:
Risk of injury! Check the appliance and its power cord before every use. A damaged appliance must never be
used.
CAUTION:
Only use the appliance if you have made sure that all the filters are properly in place and no openings are blocked.
2

3.2 Switching on

CAUTION:
You only need to touch the buttons on the operating panel very lightly. It is not necessary to actuate them with
force. This can cause damage to the buttons.
3
24
1. Make sure that the location for installation meets all the re-
quirements in chapter 2.2, „Selecting the location for installa-
tion".
2. Make sure that the socket which you intend to use carries the
same electrical voltage as that shown on the type plate on the
underside of the appliance.
3. You can now set up the appliance upright or lying flat (Fig. 2).
There are 4 feet provided on the respective underside for this
purpose.
4. Make sure that there is sufficient free space around the air inlet
and air outlet.
1. Switch on the appliance by pressing the
- The LED above the
- If you wish to adjust the power: chapter 3.3, „Selecting the
power".
- If you want the appliance to switch off after a certain period
of time: chapter 3.4, „Setting the timer".
To switch off the appliance, press the
the LEDs go out and the blower stops.
button (Fig. 3).
button lights up.
button (Fig. 3) again. All