Troubleshooting - Ohyama WOOZOO AP45-M Manual De Usuario

K

Troubleshooting

Please confirm the following problems after reading the operation manual carefully before you entrust to repair it.
State
The product
➡
does not perform
the operation
➡
Weak air flow
The product is
➡
emitting noisy
sounds
Odors or smokes
➡
cannot be
removed
Before the
(change filter)
➡
indicator lights
up, odors and
smokes cannot
be removed
➡
The product is
vibrating
Indoor dust
➡
monitor screen is
dark
The product is
emitting beep
➡
sounds and does
not work
Error 「 E1 」
The product is
emitting beep
➡
sounds and does
not work
Error 「 - - 」
If you still cannot solve the problem
Please contact the store where you bought it or
Iris Ohyama France Customer Service E-mail
CustomerService@iriseurope.fr
Warning
Cause
● The power plug is not inserted
securely into the socket
● The filter is still in the plastic bag
● The filter is not installed
● The indoor air pollution is
severe than the normal indoor
environment
● The product is placed on an
unstable surface
● The backlight's brightness is set
to the light off
● Power frequency cannot be
detected properly
● Dust cannot be detected properly
Iris Ohyama France SAS
Do not disassemble, repair or modify the product.
Measures
➡
● Insert the power plug securely into the socket.
➡
● Remove the filter from the plastic bag and install
it properly. （→P10）
➡
● Regardless of the (change filter)
➡
indicator, please change the filter as soon as
possible.
➡
● Place it on a flat and stable surface. （→P6）
➡
● Press the (change brightness)
adjust the brightness of the backlight. （→P12）
➡
● Insert the power plug again.
● The automatic operation
, normal
➡
does not work and the turbo operation works.
Contact the retail shop where you purchased the
product or Iris Ohyama France SAS
Service Center.
Customer Service Center.
17
AP45-M
button to
(silent
, strong )
Customer