K
Safety precautions
Make sure to follow the precautions described below to avoid injury or unnecessary property loss to anybody. The safety
precautions are classified according to the degree of harm or damage caused by misuse.
Examples of symbols
This symbol means
"reminding".
Use the power plug and power cord correctly
● Remove dust from the power plug
regularly
Dust buildup may lead insulation failures
Be sure to
due to moisture, cause fire or electric
shock.
● Insert the power plug securely all
the way to the socket
Otherwise it may cause electric shock or
injury due to the short circuit.
● Be sure to unplug before
conducting maintenance,
inspecting or moving the product
Unplug the
Otherwise it may cause electric shock or
product
injury.
● Do not plug or unplug with wet
hands
It may cause electric shock, burns or
Avoi d contact
injury.
wi t h wet hands
● In the case of the abnormalities
or breakdowns, stop using and
immediately turn off the power and
Be sure to
unplug
Otherwise it may cause smoke
generation, fire or electric shock.
〔Cases for abnormalities〕
• Abnormal smell or sound during operation
• Abnormal heating of power plug and
power cord
• Intermittent power on and off after
moving the power cord
• Frequent breakdown during operation
• Tingling caused by electric shock when
touching with hands.
➡Please disuse immediately and consult to
the shop you purchased the product or
Iris Ohyama France SAS
consultation number for related matters.
This symbol means
"forbidden".
Prohibited
The symbol means matters which may lead to
Warning
death or serious injury during faulty operation.
by calling the
● Stop using the product with a
faulty power cord or plug or a
loose power socket
Prohibited
It may cause electric shock or injury due
to the short circuit.
● Do not use the bundled power cord
It may overheat the code, cause burns
or fire. Be sure to unwind the power cord
before use.
● Do not stretch the power cord
when moving or storing it
It may cause fire or electric shock.
● Do not damage power cord
Do not damage, process, forcefully bend,
pull, twist or squeeze the power cord, or
place weight on it.
It may damage the power code and
cause fire or electric shock.
● The product can only be powered
by 220-240V~
Otherwise it may cause fire or electric shock.
● Do not disassemble, repair or
modify the product
It may cause fire, electric shock or injury.
Do not
Only qualified engineer can repair.
disassemble
Please consult to the shop you purchased
the product or
by calling the consultation number for
repair related matters.
● Do not use the product in the water
source, bathroom or other damp places
● Do not soak the product in water
Avoi d getti n g
or pour water on it
the product wet
It may cause fire or electric shock.
● If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
Be sure to
similarly qualified persons in order
to avoid a hazard
3
AP45-M
This symbol means
necessary "instructions".
Iris Ohyama France SAS