Hints And Tips; Technical Specification - Jocel JP2EV010148 Manual De Instruciones

Placa vitrocerámica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HINTS AND TIPS

Problem
The
hob
cannot
turned on.
The touch controls are
unresponsive.
The touch controls are
difficult to operate.
The
glass
is
being
scratched.

TECHNICAL SPECIFICATION

Installed Electric Power
2745W-3267W
Supply Voltage: 220-240V~50/60Hz
Note: Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.
Possible causes
Be
No power.
The controls are locked.
There may be a slight film of water
over the controls or you may be using
the tip of your finger when touching the
controls.
Rough-edged cookware.
Unsuitable,
abrasive
cleaning products being used.
Product Size H×W×D(mm)
52X288X590
What to do
Make sure the hob is connected to the power
supply and that it is switched on.
Check whether there is a power outage in
your home or area. If you've checked
everything and the problem persists, call a
qualified technician.
Unlock the controls. See section 'Using your
ceramic hob for instructions.
Make sure the touch control area is dry and
use the ball of your finger when touching the
controls.
Use cookware with flat and smooth bases.
See 'Choosing the right cookware'.
See 'Care and cleaning'.
scourer
or
Building-in Dimension A×B (mm)
-49-
512X275

Publicidad

Tabla de contenido
loading

Tabla de contenido