HINTS AND TIPS
Problem
The cooktop cannot
Be turned on.
The
touch
controls
are unresponsive.
The
touch
controls
are
difficult
to
operate.
The glass is being
scratched.
Some
pans
make
crackling or clicking
noises.
TECHNICAL SPECIFICATION
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.
Possible causes
No power.
The controls are locked.
There may be a slight film of
water over the controls or you
may be using the tip of your
finger when touching the
controls.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
JP4EV010162
4 zones
220-240V ~ 50/60Hz
6400W
590X520X50mm
562X492
What to do
Make sure the cooktop is connected to the
power supply and that it is switched on.
Check whether there is a power outage in your
home or area. If you've checked everything
and the problem persists, call a qualified
technician.
Unlock the controls. See section
'Using your ceramic cooktop' for instructions.
Make sure the touch control area is dry and
use the ball of your finger when touching the
controls.
Use cookware with flat and smooth bases. See
'Choosing the right cookware'.
See 'Care and cleaning'.
This is normal for cookware and
does not indicate a fault.
-45-