LEGRAND KEOR TOWER SPE Manual De Instalacion Y Uso página 49

•
Load KVA
•
Load KW
•
Load Percentage
•
Environment Temperature
•
Total capacity of installed batteries (internal + external). Not visible in case the UPS is not
expandable
Setup Entries
FUNCTION
SET + OUT + V
SET +
SET + LOAD 1
SET + LOAD 2
SET + BATT + AH
SET + IN + OUT
SET
Output voltage (200/208/220/230/240). Default value: 230V.
Buzzer on/off. Default value: ON.
Manually turn on/off Load 1 bank. Default: ON
Manually turn on/off Load 2 bank. Default: ON
Total capacity of installed batteries (internal + external),
Option: Ato, and nn Ah
nn is the Ah of user selected battery.
Ato enables the EBC auto detection.
If the UPS is not expandable, this parameter will be hidden
Auto Restart on/off. Default: ON
EPO/ROO Setting for NO/NC
There are two pages for this setting:
The main page is the selection for 'EPO' or 'ROO'
The subpage is the selection for the NO/NC
Use the ENTER/ESC button to enter/exit the main/sub page
KEOR TOWER SPE
Installation and User Manual
DESCRIPTION
expressed in Ah.
50