Commandes Et Fonctions; Audio Settings; Mic Control - Corsair VOID RGB ELITE WIRELESS Manual De Instrucciones

ENGLISH
CHARGING
The CORSAIR VOID RGB ELITE WIRELESS Headset must be fully charged before its first use.
> Connect the USB charging cable to any working USB port on your PC.
> Connect the USB charging cable to the CORSAIR VOID RGB ELITE WIRELESS Headset.
The CORSAIR VOID RGB ELITE WIRELESS Headset battery has no "memory effect", so there is no need to
completely discharge it before recharging.
Remember that the USB charging cable requires a high power (USB 2.0 or better) port. Some USB ports
found on older devices do not support USB 2.0.

AUDIO SETTINGS

Short key press (0.1-0.5 seconds) on JOG DIAL toggles EQ.
Medium key press (0.6-2 seconds) on JOG DIAL toggles 7.1 surround sound.

MIC CONTROL

Short key press (0.1-0.5 seconds) on mic mute button toggles mute on and off.
Long key press (2-4 seconds) on mic mute button toggles sidetone on and off.
NOTE: iCUE software can also be used to control these features.
FOR OPTIMAL WIRELESS PERFORMANCE
> Place the wireless USB transmitter in an open, unobstructed area.
> Make sure the battery is fully charged before initial use.
> Do not leave the battery fully discharged for long periods. Battery life is maximized by keeping the battery
in a partially charged state.
> If RGB lighting effects are unimportant to you, they can be disabled with iCUE to extend battery life.
> Remove the USB charging cable promptly after the headset has been fully charged.
> Keep the headset at room temperature (20-30°C or 68-86°F).
3

COMMANDES ET FONCTIONS

A — RÉGLAGE DE L'ARCEAU
B — BONNETTE POUR MICRO
(POUVANT ÊTRE RETIRÉE)
C — VOYANT LED DU MICRO (SILENCE)
D — ÉCLAIRAGE RVB
(PROGRAMMABLE PAR L'UTILISATEUR)
E — BOUTON DE COUPURE DU SON
A
B C D
F — BOUTON DE MARCHE
G — VOYANT LED DE SYNCHRO SANS FIL
H — BOUTON D'ASSOCIATION
(ÉMETTEUR ASSOCIÉ PAR DÉFAUT)
I — VOYANT LED D'ÉTAT (RF, NIVEAU DE BATTERIE)
J — PORT DE CHARGEMENT
K — MOLETTE (VOLUME + EQ)
G
H
E F
I J
4
FRANÇAIS
K