Serial 1 CTY Serie Manual Del Usuario página 19

Saddle Position
To get the most performance and comfort
from your eBicycle, correct saddle
adjustment is important. If the saddle
position is not comfortable for you, adjust
the saddle or seatpost or see a qualified
service provider.
The saddle can be adjusted in three
directions:
- Up and down
- Front and back
- Saddle angle
Adjust your saddle position without
exceeding the limits set by the height of the
top of the seat tube and the "minimum
insertion" or "maximum extension" mark on
the seatpost.
1. While standing next to your eBicycle,
loosen the seat clamp with the multi-
tool and raise your saddle to the
height of your hip bone. Re-tighten the
seat clamp with the torque tool to 6
Nm.
2. Sit on your bike and bring the pedals /
crank arms perpendicular to the
ground. Your leg should be locked
straight and your knee fully locked. If it
is not, get off the bike and slowly
increase the height of the saddle,
repeating as necessary until the
correct position is attained.
Handlebar Height
The eBicycle is equipped with a
"threadless" stem and is not height
adjustable.
15