GBC MOMENTUM X20-07 Manual De Instrucciones página 6

Momentum shredding capability
CAN shred the following:
• Stapled paper, 1 inch / 25 mm within the corner
• Small sized paper
Thick paper or card
<200gsm
CANNOT shred the following:
Heavy duty staples. Check the
staple leg length is not greater
than .23 inches / 6 mm.
Binder clips
Adhesive labels.
Bin full
When the bin is full the shredder will not function and the bin full
symbol will illuminate and flash red.
When this happens you must empty the bin.
Pull out the bin to empty.
Once the bin is empty, push it back in and press the On button to
resume shredding.
WARNING: The shredder bin must be fully pushed closed
for the machine to operate.
• Empty the shredder bin when it is full otherwise the
shredder's performance will be adversely affected.
Operating the shredder with a full shredder bin can result
in paper jamming in the cutters, which will increase the
machine's noise level.
• Do not force down shredder paper in the bin using
your feet.
6
No aerosols
• Paperclippped paper, 1 inch / 25 mm within the corner
• Capable of shredding small/medium paperclips
(max. wire thickness = .035 inches / .9 mm)
• <80/100gsm paper
Glossy paper or a sheet
covered with print on both
sides.
Large clips. Check the
length of the paperclip is
not longer than 1.25 inches
/ 32 mm.
Bound documents
Magazines or other
documents bound by
multiple staples or clips.
No oil
Door open
If the door is opened during shredding as a safety precaution the
shredder will instantly stop, and the door open symbol on the
indicator panel will flash red.
To resume shredding, shut the door and press the
WARNING
• The shredder DOOR must be fully pushed closed for the
machine to operate.
Lubrication of the shredder
GBC recommends using an oil sheet after the bin has been
emptied three times (and every three bin emptying after this).
Warning! Only shred CD in
machines with a separate
CD shredding slot.
Plastic sheets, laminated
documents, plastic
folders.
Warning! Never shred CDs
in the paper feed slot.
button.