Yealink MeetingBoard 65/86 Guia De Inicio Rapido página 4

2
Endpoint Installation
If you are using a floor stand for installation, please refer to
(Floor-Mounted).
Take and place all components gently to avoid damage.
MeetingBoard 65
We recommend 2 people working together to mount MeetingBoard 65, 4 people working together to
mount MeetingBoard 86.
1
Determine wall-mounted bracket (a) installation position
1. Please install on a vertical, load-bearing solid wall or concrete wall (use expansion
screw) or planks, other reinforced walls (use self-tapping screws) with more than
20 cm thickness.
2. For other type of walls, please reinforce the wall and verify the feasibility before in-
stallation. Verification method: Install a screw to carry out a single screw load test
for 1 minute (MeetingBoard 65 load-bearing 35 kg, MeetingBoard 86 load-bearing
45 kg), and the installation can continue if the screw is not loose.
3. The wall-mounted bracket for MeetingBoard 65 and MeetingBorad 86 are only dif-
ferent in size, and the installation method is the same.
4. The installation height data is for reference only. You can choose a suitable posi-
2
tion as needed.
1490mm (65 inches)
1968mm (86 inches)
MeetingBoard 86 has handles on both sides, but MeetingBoard 65 does not.
MeetingBoard 86
Quick Start Guide
97mm
26mm