NAVEE N40 Manual Del Usuario página 7

EN
4. Assembly
1. Open the kickstand.
3. Install the handlebars onto the stem, making sure to
install the handlebar in the correct direction.
Safety tips: Before each ride, please check to ensure that the screws, folding safety lock, and other linkage parts and
components are not loose.
10
2. Lift the stem up completely until it is in an upright and
locked position. Lift the folding safety lock, and push the
quick-release lever inward to its end.
4. Pre-tighten all six screws using the included wrench.
Make sure the handlebar is correctly installed before
tightening the screws thoroughly.
5. Deployment Steps
1. Open the kickstand.
3. Raise the stem back up, lift the folding safety lock,
and push the quick-release lever inward to the end.
Safety Tips: When lifting the front part of the N40 scooter, NEVER put your hands between the joints as it can result in
serious and painful injuries.
2. Pull the buckle upward to engage its release from the
hook.
EN
11