Kenwood Smoothie PRO SB300 Serie Instrucciones página 6

key
stirrer
cap
lid
goblet
tap assembly
sealing ring
blade assembly
power unit
to use your smoothie
blender
1 Fit the sealing ring over the blade
assembly.
2 Screw the goblet onto the blade
unit.
3 Screw the tap assembly onto the
goblet, then place on the power unit.
G
Check that the dispensing tap lever
is in the off position
4 Place the liquid ingredients into the
goblet.
G
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the goblet to the
level marked LIQUIDS for either 3 or
6 servings.
5 Add ice or frozen ingredients to the
goblet.
G
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These can
be added up to the level marked
FROZEN INGREDIENTS for the
corresponding number of servings.
6 Push the lid onto the goblet.
7 Either push the cap into the lid, or
place the stirrer in the hole.
G
The stirrer can be used when
blending thick mixtures or when
large quantities of frozen items are
used.
8 Press the "MIX" button for up to 30
seconds, this is to start the mixing
process, then press the "SMOOTH"
button. Allow the ingredients to
blend until smooth.
G
Use the stirrer by moving it in an anti
clockwise direction.
.
3
9 Place a glass under the tap, press
the "MIX" button and press down on
the dispensing tap lever.
G
Thinner drinks may dispense without
having to switch on the power unit.
G
Use the stirrer to assist when
dispensing thick smoothie drinks.
G
To help dispense the last amount of
a thick smoothie drink, add a few
tablespoons of liquid to increase the
flow.
10 When the glass is full, release the
lever and switch off.
hints
G
To make a thinner smoothie drink
add more liquid.
G
To make a thicker smoothie drink
add more frozen ingredients.
G
Before fitting the lid, push the solid
ingredients into the liquid using the
stirrer.
G
Use the "PULSE" button to operate
the power unit in a start stop action
to control the texture of your drink.
Take care as this automatically
selects the higher speed and may
cause the drink to be thrown up the
sides and onto the lid of the goblet.
G
After blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
G
Some drinks may separate on
standing, therefore it's best to drink
them straight away. Separated
drinks should be stirred before
drinking.
important
G
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Blender empty.
G
Don't use the blender as a storage
container. Keep it empty before and
after use.
G
Some liquids increase in volume and
froth during blending eg milk, so do
not overfill and ensure the lid is
correctly fitted.