cecotec BOLERO DRESSCODE DRY 9500 ION Manual De Instrucciones página 72

ENGLISH
Problem Cause
The drying process takes up The lint filter surface may be
too much time. blocked.
The heat exchanger may be
blocked.
The ventilation grids on the
front part of the machine may
be closed.
There may be a layer of scale
in the moisture sensor.
The dryer may be overloaded
with laundry.
The laundry might be
insufficiently spin-dried.
The laundry is moist after the
The laundry which is hot after the drying process is
drying process.
usually moister.
The programme used may
not be suitable for the type of
laundry.
The lint filter surface may be
blocked.
The heat exchanger may be
blocked.
The dryer may be overloaded
with laundry.
The laundry might be
insufficiently spin-dried.
142
Solution
Wash the filter with warm
water.
Clean the heat exchanger.
Open the doors/windows
to prevent the room
temperature from
increasing too much.
Clean the moisture
sensor.
Do not overload the dryer.
Select a higher spin
speed.
Check the care labels
on the laundry, select a
suitable programme for
the type of laundry and
use the time programmes.
Wash the filter with warm
water.
Clean the heat exchanger.
Do not overload the dryer.
Select a higher spin
speed.
The dryer cannot be opened The dryer may not be plugged
or the programme cannot be in.
started. The dryer does not
The loading door may be
start when it is set.
open.
You may have not selected a
programme or you may not
have pressed the Start/Pause
button.
The child lock may be active.
The programme has been The loading door may not be
interrupted for no reason. properly closed.
There may have been a power
cut.
The water tank may be full.
Clothes have shrunk, become The programme used may
compacted or deteriorated. not be suitable for the type of
laundry.
Water leakage on the loading There may be accumulated
door. lint
in the interior surface of the
loading door and in the
sealing
surface of the loading door.
The loading door opens by The door may
itself. not be properly closed.
The warning symbol of the The water tank may be
water tank is on/ full.
flashing.
The drain hose
may be bent.
ENGLISH
Make sure that the plug
is inserted into the socket.
Make sure the loading
door is properly closed.
Make sure you have
selected the programme
and the dryer is not in the
standby mode.
Disable the child lock.
Make sure the loading
door is properly closed.
Press the Start/Pause
button to start the
programme.
Empty the water tank.
Check the care labels on
the laundry and select a
suitable programme for
the type of laundry.
Clean the interior surface
of the
loading door and the
sealing
surface of the loading
door.
Push the loading door
until
you hear the closing
sound.
Empty the water tank.
If the product is
connected
directly to a water outlet
check the drain hose.
water level.
143
BOLERO DRESSCODE DRY 9500 ION