Technical Specifications - cecotec BOLERO DRESSCODE DRY 9500 ION Manual De Instrucciones

ENGLISH
The warning symbol of the The heat exchanger may
heat exchanger cleaning be dirty.
is on.
The warning symbol of the The lint filters may be dirty.
filter cleaning is on.
The filter base may be
blocked by lint.
There may be a layer blocking
the surface of the lint filters.
The filter and heat exchanger The filter base may be
cleaning warning symbols are blocked by lint.
flashing.
There may be a layer blocking
the surface of the lint filters.
The heat exchanger may be
blocked.
The programme cannot start The filter cannot be placed.
and the filter warning LED is
The filter warning LED is
flashing.
flashing even though the filter
is placed.
Automatic error warnings
Your dryer is equipped with a built-in fault detection system, indicated by a combination of
flashing operating lights. Next, you can find the most common error codes.
Error codes
E3/
E04
E05
E06
E07
144
Clean the heat exchanger.
Clean the filters.
Clean the filter base.
Wash the filters with
warm water.
Clean the filter base.
Wash the filters with
warm water.
Clean the heat exchanger.
Replace the filter.
Contact the Technical
Support Service.
Solution
If the problem is not solved, contact the
nearest authorised service centre.
Contact your nearest authorised service
company.
Contact your nearest authorised service
company.
Contact your nearest authorised service
company.
Contact your nearest authorised service
company.
E08
If the dryer displays a code which is not listed in the table, please contact the Cecotec
Technical Support Service.

8. TECHNICAL SPECIFICATIONS

Brand
Name of the model
QR code
Height
Width
Depth
Capacity (max.)
Net weight (with plastic door)
Net weight (with glass door)
Voltage
Frequency
Power
*Min. height: Height without using the adjustable feet. Max. height: Height with the adjustable
feet extended to the maximum.
**Weight of dry linen before washing.
IMPORTANT: In order to improve the quality of the dryer, technical specifications are
subject to change without prior notice.
IMPORTANT: The values stated have been obtained in a laboratory environment in
accordance with the relevant regulations. These values may vary depending on the
environmental conditions and the use of the dryer.
ATTENTION:
1. For safety reasons, legislation requires a room of at least 1 m
ENGLISH
There may be voltage fluctuations in
the mains. Wait until the voltage is
appropriate for the operating range.
Cecotec
02354 DRESSCODE DRY 9500 ION
Min: 845 mm / Max: 855 mm*
596 mm
609 mm
9 kg**
49.0 kg
51.4 kg
220-240 V~
50 Hz
1000 W
per 8 g of refrigerant
3
145
BOLERO DRESSCODE DRY 9500 ION