cecotec BOLERO DRESSCODE DRY 9500 ION Manual De Instrucciones página 9

- Children under 3 years old must stay away, unless they are
supervised.
- This dryer is suitable for indoor domestic use only. In case
of commercial use, the warranty will be void.
- Do not install nor store the dryer outdoors.
- Use this product only for clothes whose care label specifies
they are suitable for dryer.
- Cecotec is not responsible for damage caused by incorrect
transport or use.
- Do not allow floor coverings to obstruct ventilation
openings.
- Installation and repair of the appliance must only be carried
out by Cecotec or an authorised repair agent.
- Cecotec is not liable for damage caused by repairs by
unauthorised personnel.
WARNING: Never spray or pour water inside the dryer to
clean it. There is a risk of electric shock.
- Leave at least 3 cm of space between the side and
rear panels of the product and above the product if the
appliance is placed under a worktop.
- If assembly/disassembly of the installation under a
worktop is necessary, this must be carried out by an
authorised service technician.
- Before installation, check the product for visible damage.
Never install nor operate a damaged product.
- Do not let any animal near the dryer.
- Fabric softeners or similar products should be used
according to the manufacturer instructions.
- Remove all the objects from the pockets: lighters, matches,
etc.
- The appliance should not be installed behind a lockable
door, a sliding door or a hinged door on the opposite side of
16
the dryer door in such a way as to prevent the dryer door
from being fully opened.
WARNING: Keep the ventilation openings in the housing
of the appliance or in the built-in structure free of
obstructions.
- Before contacting the local authorised service provider for
the installation of the dryer, check the information in the
user manual to make sure that the electrical installation
and water connection are available. If they are not, you
can call a qualified electrician and plumber to make the
necessary adjustments.
- The preparation of the dryer location is the responsibility
of the customer, as well as the electrical and sewage
installation. Before installation, check the dryer for any
damage. If it is damaged, do not install it. Damaged
products may be a risk for your health.
- Install the dryer on a flat and stable surface.
- Run the dryer in an environment free from dust with good
air ventilation.
- You should not reduce the space between the dryer and the
floor with objects like carpets, wood or cloths.
- Do not block the ventilation grids on the base of the dryer.
- Once the dryer is installed, the connections must remain
intact. When installing the dryer, make sure that the rear
surface is not resting on something (a tap, a socket, etc.).
- The operating temperature of the dryer ranges from 5°C to
35°C. When operating at temperatures outside this range,
the operation may be adversely affected and the product
may be damaged.
- Be careful when transporting the product, as it is really
heavy. Always wear safety gloves.
- Always install the product against a wall.
17
BOLERO DRESSCODE DRY 9500 ION